enable mod_cache in apache2
if you're using debian linux and want to activate mod_cache by apache remeber not only to type
a2enmod mem_cache (or disk_cache)
but also
Routing for multiple uplinks/providers
________ +------------+ / | | | +-------------+ Provider 1 +------- __ | | | / ___/ \_ +------+-------+ +------------+ | _/ \__ | if1 | / / \ | | | | Local network -----+ Linux router | | Internet \_ __/ | | | \__ __/ | if2 | \ \___/ +------+-------+ +------------+ | | | | \ +-------------+ Provider 2 +------- | | | +------------+ \________
There are usually two questions given this setup.
PPTP client
how to configure PPTP client under linux 
?
here is a site http://pptpclient.sourceforge.net/documentation.phtml where you can find very good documantation regarding your version of linux
for me its Debian and i post here how to config 
Lesson 2. FreeRADIUS – ntlm_auth
Once you have verified that Samba is installed and working correctly, and that the ntlm_auth program works, you can proceed with configuring FreeRADIUS to use ntlm_auth. For initial testing, we will be using the exec module, and will run the exact command line used above.
In the radiusd.conf file, add the following text to the modules section:
squid 2.6 – how to fast config
This post is about squid and how to configure it really fast, I’m putting here my config file of squid that works on core2duo 2 GB ram machine with 500GB hard drive.
First of all we need to install squid ( debian gnu linux)
apt-get install squid
Ok, after we need to go to /etc/squid and edit there few files.
First of all we need to create file flood.txt
Pages
Recent Comments
- angel on how to reset password on Linksys WRT54GL running OpenWRT
- rich on how to reset password on Linksys WRT54GL running OpenWRT
- rosniza on AntiDDOS or magic shield :)
- samuray on how to reset password on Linksys WRT54GL running OpenWRT
- samuray on how to reset password on Linksys WRT54GL running OpenWRT
